DESIGNED FOR the 3M Water Filtration System for Commercial Ice Maker Machines ICE160-S and ICE260-S | GREAT TASTING ICE: Provides consistent quality water for commercial ice machines by reducing sediment, chlorine taste and odor, cysts, bacteria, and scale at flow rates up to 3.34 gpm | RECIPE QUALITY WATER for restaurants, cafés, quick service restaurants, coffee shops, convenience stores, and other foodservice outlets | LESS DOWNTIME AND FEWER SERVICE CALLS with built-in scale inhibitor which helps prevent corrosion and helps to extend the life of pumps, valves, seals and more with less scale build-up | SUPERIOR THROUGHPUT AND CARTRIDGE LIFE with revolutionary Integrated Membrane Pre-Activated Carbon Technology (I.M.P.A.C.T.) dual-zone media cartridge construction combined with a membrane in series with premium activated carbon | NO CONTACT WITH FILTER MEDIA: Sanitary Quick Change (SQC) design allows for fast and easy cartridge change-outs that are sanitary by design - requiring no contact with the filter media | NO NEED FOR A SEPARATE WATER SHUTOFF: Simple and trouble-free cartridge change-outs. No need for a separate water shutoff when used with ball-valve included with the ICE160-S system | NSF STANDARD 42 CERTIFIED: This system has been tested and certified by NSF International against NSF/ANSI Standard 42 and CSA B483.1 for the reduction of Chlorine Taste, Odor, and Particulate | NSF STANDARD 53 CERTIFIED: This system has been tested and certified by NSF International against NSF/ANSI Standard 53 for the reduction of cysts
See-thru Bowl has an easy to use sediment drain valve and allows for visual monitoring of fuel flow | Maximum recommended flow rate of 25 GPM (gravity flow rate is approximately 5 gpm with a 24 inch head); working pressure up to 150 psi | 366 sq. inches of filter surface for efficient action | Removes microscopic particles (10 microns) of rust, sand, dirt, scale, and lint | Zinc die-cast top cap with 1" NPT pipe fittings
Package Dimensions: 25.907 cms (L) x 11.684 cms (W) x 25.907 cms (H) | Product Type: Fuel Filter | Package Quantity: 1 | Country Of Origin: United States
For GOLDENROD See-Through bowl fuel tank filter Water-Block models 496 and 496-3/4 only | 17 micron filtration | Water-Block filter removes water from gasoline and diesel fuel | Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element | Made in the U.S.A.
Spin-on canister filters microscopic particles (10 microns) of rust, sand, dirt, scale & lint | Working pressure up to 50 PSI and/or 12 gpm. | Compatible w/gasoline, diesel, fuel oil, related additives inc. methyl, ethyl, & isopropyl alcohol | Also can be used with biodiesel blends up to 20%. | Zinc top-cap with 1 inch NPT pipe fittings/Disposable/Made in USA
Water-Block filter removes water from gasoline and diesel fuel; Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the canister | Removes microscopic particles (10 microns) of rust, sand, dirt, scale, and lint | Zinc die-cast top cap with 14" NPT pipe fittings | Entire canister can be thrown away and replaced | Maximum recommended flow rate of 25 GPM; working pressure up to 50 psi
For GOLDENROD bowl fuel tank filter standard models 495 and 495-3/4 only | 10 micron filtration | Standard filter for use with common fuels including regular and unleaded gasoline, diesel fuel, fuel oil, and related additives including methyl, ethyl, and isopropyl alcohol (also compatible with biodiesel blends up to 20 percent) | Made in the U.S.A.
For GOLDENROD See-Through bowl fuel tank filter models 495, 495-3/4, 496, 496-3/4, 497, and 497-3/4 | See-Thru bowl allows for visual monitoring of fuel flow | Alcohol-resistant polymer material stands up to harsh weather conditions | Easy-to-use sediment drain valve | To prevent the bowl from cracking when changing element, use GOLDENROD fuel tank filter wrench
For GOLDENROD See-Through bowl fuel tank filter Bio-Flo models 497 and 497-3/4 only | 10 micron filtration | For use with biodiesel blends up to 100 percent | Made in the U.S.A.
WiFi Borescope transmits and displays video and images directly to your smartphone up to 30 Feet (9 m) away | Waterproof 9 mm camera has 6 on-board, adjustable LED lights and outputs high-quality 640 x 480 images | Tough, armored 6-Foot (1.8 m) long waterproof camera gooseneck maneuvers around obstacles while maintaining rigidity | Battery status indicator tracks the charge level of the lithium-ion battery | Increase and decrease camera LED output either on the Borescope or in the App
The product is 91037 COUPLING, 3/8 IW CABLE REPAIR | The product is used for pipe-fittings | This product manufactured in United States | For Use on 3/8" Integral-Wound Cable | Repairs Drain Cleaning Cable Ends | Comes With A Fitting
Optional, fully flexible 6-foot (180 cm) extension cable attaches to a RIDGID micro inspection camera for longer cable reach into hard-to-reach areas | RIDGID inspection camera has a 3-foot (90 cm) cable reach that is expandable up to 30 feet (9 meters) with use of optional cable extensions | Designed for easy installation, the extension cable quickly and easily connects the camera head cable to the handheld display unit | Compatible with RIDGID micro CA-100, micro CA-300, microEXPLORER and SeeSnake micro systems | RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
The product is 62535 TAPE, 62535 1/2 X 1/16 X 50' | The product use for tape reels | This product manufacture by United States | For Use on Sewer and Drain Lines through 8" | Has a Ball Roller on One End and a Spear on the Other | Comes With A Hand Grip | 50' in Length
The product is 62565 TAPE, 62565 3/4 X 1/16 X 100' | The product use for tape reels | This product manufacture by United States | Drain Cleaning Cable | Rotates Auger Head to Remove Debris from Lines | For Use With Ridgid Drain Cleaning Machines
The product is 62595 TAPE, 62595 3/4 X 1/8 X 50' | The product use for tape reels | This product manufacture by United States | 3/4" in Diameter and 50' in Length | Has a Hand Grip and Spear on One End and Roller Ball at the Other | Made for Sewer Drain and Drain Lines | Comes With Carrying Harness
The product is 62625 TAPE, 62625 1 X 1/8 X 100' | The product use for tape reels | This product manufacture by United States | 1" in Diameter and 100' in Length | Has a Hand Grip and Spear on One End and Roller Ball at the Other | Made for Sewer Drain and Drain Lines | Comes With Carrying Harness
Drain cleaning, left-handed mitt | Reinforced, Gripped Palm and Thumb | Keeps Cable Handling Hand Safe and Clean During Use | Item Package Quantity: 1 | Reinforced, Gripped Palm and Thumb | Left Hand Glove Only | Keeps Cable Handling Hand Safe and Clean During Use
The product is 59210 CARRIER, A10 5/8 & 7/8 | The product use for circular saw accessories | This product manufacture by United States | Cable Carrying Harness | Holds up to 90' of C-7, C-8 and C-9 5/8" Cable | Made of Steel for a Long Usage Life