Search

Enerpac® P-392 Hand Pump W/35T Part# Stp35H (1 Set)

Manufacturer: ENERPAC®
Single-acting hydraulic punch and air-driven pump for punching holes through mild steel sheet metal or other materials | Punch and die set for punching round holes measuring 3/8", 1/2", 5/8", or 3/4" | Two speeds for pumping efficiency and optimal flow | 35-ton punching force for punching holes through mild steel measuring up to 0.50" thick | Flow rate of 0.151 cu. in. per stroke at maximum operating pressure of 10,000 psi
$8,010.97
i h
The Enerpac STP-35H tool and pump set includes an Enerpac SP-35 single-acting hydraulic punch and an Enerpac P-392 hydraulic hand pump and is suitable for punching holes through mild steel sheet metal or other materials for fitting bolts or for other applications. The hydraulic punch contains a single-acting hydraulic cylinder, delivers 35 tons of punching force, and holds up to 76 cu. in. of hydraulic fluid. Single-acting cylinders use liquid pumped through a single port for rod extension and an internal spring for rod retraction to produce continued movement. The punch and die set contains Enerpac SPD-438, SPD-688, SPD-563, and SPD-813 punches and dies for punching round holes measuring 3/8, 1/2, 5/8, or 3/4 inches in diameter. The hydraulic punch is suitable for use with other punches and dies (sold separately) for punching oblong or square holes. The tool kit can be used for installing and removing punches and dies. The CR-400 female coupler connects the punch to the pump. The punch includes a steel case for transport and storage. The hand-operated, two-speed pump has a glass-filled nylon reservoir and a nylon-encased aluminum base for corrosion resistance and a fiberglass handle for non-reactivity. The reservoir holds up to 55 cu. in. of hydraulic fluid. Two-speed pumps typically require fewer handle strokes than single-speed pumps for efficiency and optimal flow. The handle displaces 0.687 cu. in. of fluid per stroke at 200 psi (pounds per square inch) or 0.151 cu. in. per stroke at 10,000 psi. The handle locks for carrying. An internal pressure relief valve helps prevent overloading. The hydraulic punch weighs 35 lb. and can punch holes through mild steel measuring up to 0.50" thick. The pump weighs 9 lb. and has a maximum operating pressure of 10,000 psi.Enerpac manufactures high-pressure tools and equipment for industrial applications. The company, founded in 1910, is headquartered in Menomonee Falls, WI. What's in the Box? SP-35 single-acting hydraulic punch P-392 hydraulic hand pump HC-7206 high-pressure hydraulic hose GP-10S pressure gauge GA-2 gauge adapter Steel carrying case for hydraulic punch