TRENDnet

ETHERNET PORT CONFIGURATION: 16 Gigabit RJ 45 ports provide high speed network connections to devices and a 32 Gbps switching capacity allows data traffic to flow smoothly, reducing traffic bottlenecks. | DESKTOP DESIGN: Compact and sturdy metal Ethernet desktop gigabit switch housing design is well suited for desktop installations. Its fanless design is perfect for quiet environments that require silent operation. | ENERGY SAVINGS: Embedded GREENnet technology provides cost savings and reduces power consumption by up to 70 percent, by limiting port power consumption during periods of low link utilization. | MOUNTING OPTIONS: Optional Rack Mount (sold separately) Rack mountable with ETH 11MK rack mount brackets. | PLUG AND PLAY: Simply power up the switch and plug in connected devices. No software to install or configuration needed. | LOW NOISE OPERATION: Fanless design lowers energy consumption and eliminates operating noise

Mini-gbic slot accommodates multi (SX) or single-mode (LX) fiber modules | 100/1000baset-t auto-sensing/ negotiation Ethernet port | 100Base-fx/ 1000Base-SX/ LX mini-GBIC slot | Functions as a standalone converter or with the tfc-1600 fiber chassis | Lifetime TRENDnet manufacturer’s

SC-type multi-mode fiber port connects over distances of up to 2km (1.2 miles) | 10/100Base-TX port supports Auto-Negotiation, Auto-MDIX and Full-Duplex mode | Functions as a stand alone converter or with the TFC-1600 fiber chassis | Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX / 100Base-FX standards

POINT TO POINT BRIDGE:2 10 dBi Outdoor PoE Access Points with wireless N300 point-to-point networking (2.4 GHz) | PRECONFIGURED KIT: 2 x Preconfigured Wireless N access points. Reduce installation and setup time with this preconfigured and pre-encrypted long range wireless bridge kit | POE POWER ADAPTER: Included power adapter provides power and data over a single Ethernet cable with a maximum distance of 60 m (197 ft.) | WIRELESS N300 (2.4 GHz): The N300 Oudoor access point kit is compliant with 802.11b/g/n technology (2.4 GHz) with data rates up to 300 Mbps | WIRELESS MODES: Supports Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP, Wireless ISP (WISP) + AP, CPE + AP, and control AP (CAP) modes | OUTDOOR READY: The PoE Access Point has a durable enclosure with an IPX6 outdoor weather rating. Operating Temperature of -20 - 60° C (-4 - 140° F). | DIRECTIONAL ANTENNA: The 10 dBi Access Point has a built-in 10 dBi directional antenna | NDAA / TAA compliant (U.S. and Canada only)

ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, 2 x SFP slots | POE+ POWER & SWITCHING CAPACITY: A 20Gbps switching capacity and 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling. | DIN-RAIL & WALL MOUNT KIT: This 10-Port gigabit layer 2 PoE+ industrial switch comes with an integrated DIN-Rail mount and mounting hardware. | EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated gigabit layer 2 PoE+ DIN-Rail switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 - 75 °C (- 40 - 167 °F)) for harsh environments. | INTEGRATION FLEXIBILITY: The layer 2 managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. | REDUNDANT POWER: The 10 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: TI-S12024, TI-S15052, TI-S24052, TI-S24048, TI-S48048) | TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Warranty. | GROUDING POINT: 10-port Ethernet switch grounding point feature protects equipment from external electrical surges | SHOCK & VIBRATION RESISTANT: The managed switch is rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) | NDAA / TAA compliant (U.S. and Canada only)

ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, 2 x SFP slots | POE+ POWER & SWITCHING CAPACITY: A 20Gbps switching capacity and 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling. | DIN-RAIL & WALL MOUNT KIT: This 10-Port gigabit layer 2 PoE+ industrial switch comes with an integrated DIN-Rail mount and mounting hardware. | EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated gigabit layer 2 PoE+ DIN-Rail switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 - 75 °C (- 40 - 167 °F)) for harsh environments. | INTEGRATION FLEXIBILITY: The layer 2 managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. | REDUNDANT POWER: The 10 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: TI-S12024, TI-S15052, TI-S24052, TI-S24048, TI-S48048) | TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Warranty. | GROUDING POINT: 10-port Ethernet switch grounding point feature protects equipment from external electrical surges | SHOCK & VIBRATION RESISTANT: The managed switch is rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) | NDAA / TAA compliant (U.S. and Canada only)

IP30 rated industrial power supply with integrated DIN-rail mount | Provides up to 120 Watts of power (48 V, 2.5 A) | Built-in active PFC (PF > 0.93) | Short circuit/overload/over voltage/over temperature protection | High efficiency (91%) design | UL 508 approved | 100 % full load burn-in test | Extreme -25 to 70 °C (-13 to 158 °F) operating temperature range

16 x Gigabit PoE+ ports | 240W PoE power budget | Power supply sold separately (models: TI-S24052, TI-S24048, TI-S48048) | 32Gbps switching capacity | 32Gbps switching capacity | Includes DIN-rail and wall mounts | Operating temperature range of -40° - 75° C (-40° - 167° F) | Redundant power inputs with overload current protection ;Alarm output triggered by power failure | TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection | NDAA / TAA compliant

16 x Gigabit PoE+ ports | 2 x Shared Gigabit ports (RJ-45 or SFP) | 36Gbps switching capacity | Internal power supply | 440W PoE power budget | Reduces equipment cost by delivering data and power over existing network cables | Sturdy rack mountable metal housing

Epson T9074 Print Cartridge | Colors: Yellow | Capacity: 68 ml | Colour ink volume: 68 ml

24-Port blank Keystone shielded Patch panel | 1U 19" Rack mount ready | HIGH DENSITY PANEL: Only to be used and accepted with High Density keystone jacks. Recommend to use with TRENDnet's TC-K06C6A Cat6A shielded keystone jack (sold separately). | Shielded housing protects against EMI/RFI noise | 3 year TRENDnet Manufacturer’s Protection | NDAA compliant (U.S. and Canada only)

Rack mount 24-port Gigabit ready panel | Cat5e patch panels deliver a steady 100Mhz connection to copper Gigabit switches | Ideal solution for Ethernet, Fast Ethernet and Gigabit applications | Use with TRENDnet TC-PDT Punch Down Tool. Backward compatible with CAT 3, 4 and 5 cabling | Use with TRENDnet TC-CT68 RJ-11/RJ-45 crimp/cut/strip tool, B0000AZK4G

Gigabit ready rack mount 24-port panel | Cat6 patch panels deliver a steady 250Mhz connection to copper Gigabit switches | Ideal solution for Ethernet, Fast Ethernet and Gigabit applications | Use with TRENDnet TC-PDT Punch Down Tool, B0000AZK4D | Use with TRENDnet TC-CT68 RJ-11/RJ-45 crimp/cut/strip tool, B0000AZK4G

2-IN-1 USB/VGA KVM CABLE: Consist of a USB keyboard/mouse cable and monitor cable bonded into a single device | MONITOR: VGA/SVGA HDB 15-pin Male to Male | KEYBOARD/MOUSE: USB 1.1 Type A | CONNECT COMPUTERS: This cable is designed to connect computers with VGA and USB ports to a TRENDnet TK-207K, TK-209K, TK-407K, TK-409K, TK-423K, TK-803R, TK-804R, TK-1603R or TK-1604R KVM Switch | LENGTH: This KVM cable is 6 feet (1.83 m)

2-IN-1 USB/VGA KVM CABLE: Consist of a USB keyboard/mouse cable and monitor cable bonded into a single device | MONITOR: VGA/SVGA HDB 15-pin Male to Male | KEYBOARD/MOUSE: USB 1.1 Type A | CONNECT COMPUTERS: This cable is designed to connect computers with VGA and USB ports to a TRENDnet TK-207K, TK-209K, TK-407K, TK-409K, TK-423K, TK-803R, TK-804R, TK-1603R or TK-1604R KVM Switch | LENGTH: This KVM cable is 10 feet (3.1 m)

CONTROL TWO COMPUTERS: This 2-port Dual monitor DisplayPort KVM 1. 2 KVM switch allows you to control two computers with one set of console controls and is designed for use with Dual DisplayPort systems. The KVM switch is designed to connect two DisplayPort monitors. [Recommended for use with DisplayPort monitors and graphic cards with DisplayPort] | REQUIRED CABLING: Must use this KVM switch with 2 x TK-CP06 TRENDnet DisplayPort, USB, and Audio KVM Cable Kits (Sold Separately) plus 2 x High Quality DisplayPort Cables | 4K UHD RESOLUTION: This 2-port KVM switch enables you to experience up to 4K UHD resolutions 3840 x 2160 @ 60Hz and up to 2560 x 1440 @144 Hz | AUDIO SUPPORT: The dual monitor KVM switch provides full audio support with 3. 5mm Microphone and speaker jacks that maximize work station productivity | USB 2. 0 HUB: The KVM switch is designed with two additional USB ports to connect storage drives and printers between computers. | USB MOUSE and KEYBOARD: True Transparent USB (TTU) emulation technology supports most keyboard and mouse designs with the KVM switch. | DEVICE INTERFACE: Keyboard: USB Type A, Mouse: USB Type A, Monitors: 2 x DisplayPort 1.2, 2-port USB 2. 0 Hub, Speaker jack: 3. 5mm, Microphone jack: 3. 5mm | NDAA / TAA compliant (U.S. and Canada only)

2-port KVM switch with VGA and USB connections to computers and audio devices | Listen to music from one computer while working on the other | High quality 2048x1536 resolution for a crisp display | Supports most operating systems and advance mouse designs | All required cabling included | NDAA compliant (U.S. and Canada only)

2-port KVM switch with VGA and USB connections to computers | Device monitoring with Auto-Scan and audible feedback | High quality 2048 x 1536 resolution for a crisp display | Support most operating systems and advance mouse designs | All required cabling included | NDAA compliant (U.S. and Canada only)

BLANK KEYSTONE 2U PATCH PANEL: The 48-Port Blank Keystone 2U Patch Panel supports standard sized keystone jacks for audio video and data; Recommended to be used with TRENDnet’s Cat6 keystone jacks TC-K25C6 and TC-K50C6 (Sold Separately) | HARDWARE DESIGN: The 48 Port Patch Panel has a 19” 2U sturdy metal rackmount hardware design that allows for seamless use with Cat6 keystone jacks to then create a patch panel solution suitable for high-speed gigabit network applications | CABLE MANAGEMENT: The blank keystone patch panel includes pre-numbered sequential ports with supplementary writable labels that allows for easy recognition of the cables being used. | STURDY METAL DESIGN: The 2U Patch Panel is made from SPCC steel for long lasting use and the ability to withstand the weight and torque when use together with cables and keystone jacks | Fully customizable with standard HD keystone jacks

Ideal solution for Ethernet, Fast Ethernet and Gigabit applications | Gigabit ready rack mount 48-port panel | Cat6 patch panels deliver a steady 250Mhz connection to copper Gigabit switches | Ideal for Ethernet, Fast Ethernet and Copper Gigabit Ethernet (1000Base-T) network applications | Backward compatible with Cat. 3, 4, 5, 5e, and 6 cabling | Use with TRENDnet TC-PDT Punch Down Tool, B0000AZK4D | Use with TRENDnet TC-CT68 RJ-11/RJ-45 crimp/cut/strip tool, B0000AZK4G

4K HD resolution; 5.1 Audio support over HDMI cable | Compatible with Windows and Mac | Connect up to 32 devices to TWP-100R1K (one device per TWP-101T) | HDMI 1.4 compliant with HDCP 1.4 support | Plug-and-play | NDAA / TAA compliant (U.S. and Canada only)

4K HD resolution | 5.1 Audio support over HDMI cable | Compatible with Windows and Mac | Works with Android and iOS devices | Connects up to 32 devices | HDMI 1.4 compliant with HDCP 1.4 support | Plug-and-play | NDAA / TAA compliant (U.S. and Canada only)

DEVICE INTERFACE: 4 x Gigabit Ethernet Ports; 1 x SFP slot; LED indicators; Wall Mount | SWITCHING CAPACITY: This fanless unmanaged desktop switch offers a total switching capacity of 10 Gbps combined with the flexibility of fiber networking | REAR FACING PORTS: 4 x Gigabit Ethernet ports and 1 x SFP slot in the rear with LED indicators covey port status | TRAFFIC PRIORITIZATION: 802.1p QoS maintains your voice and video priority throughout the network | TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection | MOUNTING KIT: The gigabit switch comes with a magnet mounting kit for easy installation | JUMBO FRAME: Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performance with this 4 Port Network Switch | NDAA / TAA compliant (U.S. and Canada only)

DEVICE INTERFACE: 1 x USB 3.0 connector; 4 x USB 3.0 ports | SUPERSPEED DATA: Add four SuperSpeed 5Gbps USB 3.0 ports with this compact USB hub, and connect up to four USB 3.0 devices to a USB 3.0 enable desktop or notebook PC | COMPATABILITY: The 4-Port USB hub is backwards compatible with USB 2.0 and USB 1.1 ports and devices | USB POWERED: No power adapter is needed since the USB mini hub has an integrated 14cm (5.5 inch) cable powered via a USB port. | COMPACT DESIGN: The small compact design reduces desktop clutter and allows for easy on the go use. | EASY INSTALLATION: Simply plug in flash drives, printers, scanners, and other USB 3.0 devices to enjoy speeds up to ten times faster than USB 2.0 | OPERATING SYSTEMS: Compatible with Windows and Mac operating systems

4-port KVM switch with VGA and USB connections to computers and audio devices | Listen to music from one computer while working on the other | High quality 2048 x 1536 resolution for a crisp display | Supports most operating systems and advance mouse designs | All required cabling included | NDAA compliant (U.S. and Canada only)

4-Port KVM switch with VGA and USB connections to computers | Device monitoring with Auto-Scan and audible feedback | High quality 2048 x 1536 resolution for a crisp display | Supports most operating systems and advanced mouse designs | All required cabling included | NDAA compliant (U.S. and Canada only)

DEVICE INTERFACE: 5 x 10G RJ-45 Ports (100Mbps/1Gbps/2.5Gbps/5Gbps/10Gbps); LED indicators. | 10G PORTS: This 5-Port 10G switch provides a cost-effective solution in adding 10G link capability with five 10G ports for high-speed connections over Cat6a cabling (or better). | MULTI-GIGABIT SUPPORT: This versatile unmanaged 10G switch also supports 2.5G/5G-BASE-T connections for faster speeds over your existing Cat5e cabling (or better). | SWITCHING CAPACITY: The 10G switch has a 100Gbps switching capacity. | TRENDNET LIFETIME PROTECTION: The TEG-S750 switch comes with Lifetime TRENDnet protection. | FANLESS DESIGN: Fanless design lowers energy consumption and eliminates noise for silent operation. | Supports IEEE 802.3bz 2.5G/5G-BASE-T over cat5e cabling (or better). | Supports IEEE 802.3an 10G-BASE-T over cat6a cabling (or better). | NDAA / TAA compliant (U.S. and Canada only)

ETHERNET PORT CONFIGURATION: 4 x Gigabit PoE+ ports, 1x Gigabit port. | EDGESMART NETWORK MANAGEMENT: Provides an easy-to-use web-based management interface for reduced switch configuration complexity and offers a combination of more commonly used SMB management features for easy deployment.The web-based management interface offers features for loopback detection, RSTP, static link aggregation, VLAN, IGMP Snooping, and QoS | INTEGRATION FLEXIBILITY: Managed features include loopback detection, RSTP, static link aggregation, VLAN, IGMP Snooping, and QoS for flexible network integration. | PoE+ POWER: A 31W PoE power budget supplies up to four Power over Ethernet devices from the 5-port smart PoE+ switch. | MONITORING SOLUTIONS: SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions | COMPACT FANLESS DESIGN: With a fanless compact and lightweight metal housing design, this switch is well-suited for desktop and wall mount installations

ETHERNET PORT CONFIGURATION: 4 Gigabit PoE+ ports and 1 Gigabit port with LED indicators, provides a 10Gbps switching capacity to support edge network installations. | DESKTOP DESIGN: With a compact and lightweight metal housing design, this Ethernet switch is well-suited for desktop installations. | PoE+ POWER: A 31W PoE power budget supplies up to four Power over Ethernet devices. TPE-TG50g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points and IP cameras. | PLUG-AND-PLAY: Simply power up the switch and plug in connected devices. No software to install or configuration needed. | DATA TRANSFER RATE: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) | TRENDnet LIFETIME PROTECTION: Lifetime TRENDnet Manufacturer Warranty | NDAA / TAA compliant (U.S. and Canada only)

ETHERNET PORT INTERFACE: 5 x Gigabit Ethernet ports | SWITCHING CAPACITY: The hardened industrial gigabit switch and five gigabit ports provide a 10 Gbps switching capacity | DIN-RAIL & WALL MOUNT KIT: This 5-Port gigabit Ethernet IP30 rated network metal switch comes equipped with included DIN-rail and wall mount hardware | EXTREME TEMPERATURE SWITCH: The hardened IP30 rated gigabit switch is rated for extreme temperatures with an operating temperature range of -40 to 75 ºC (-40 to 167 ºF) | ELECTRO MAGNETIC COMPLIANT & SHOCK & VIBRATION RESISTANT: Industrial DIN-rail switch complies with FCC Part 15 Subpart B Class A and CE EN 55022 Class A standards and is rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) | REDUNDANT POWER: The 5 port switch has dual redundant power inputs with overload current protection (power supply sold separately: model TI-M6024) | TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection