SABRENT

Instantly Add 13 USB 2.0 Ports to Any Compatible Device | Gain 13 Downstream Ports Which Offer High-Speed (480Mbps), Full-Speed (12Mbps), And Low-Speed (1.5Mbps) | Easy Setup, Plug-n-Play, Hot Swappable, Hot Pluggable | Backwards Compatible With 1.1 Devices and Hosts Add up to 127 Devices by Daisy-Chaining Multiple Hubs | Power supply spec Input:100-240V 50/60HZ 0.5A Output:5V/2500mA

Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port. | Suitable for 2.5” SATA/SSD;Supports Standard Notebook 2.5″ SATA and SATA II Hard drives | Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1 | Hot-swappable, plug and play, no drivers needed | Operating System:Supported Operating Systems:Mac,Windows;Supported Windows Versions :Windows 7, Windows 8, Windows Vista, Windows XP;Supported Mac Versions:Mac OS X and Higher

Convert any 2 2.5" Hardrive into a 3.5" drive bay | Compatible with all types of 2.5" hard drive. Including SSD DRIVES!!! | Quick and easy installation | For use in 3.5" internal drive bay | Screw pack included to mount the drives

Convert any 2 2.5" Hardrive into a 3.5" drive bay | Compatible with all types of 2.5" hard drive. Including SSD DRIVES!!! | Quick and easy installation | For use in 3.5" internal drive bay | Screw pack included to mount the drives

Compatible with any 2.5-Inch SATA hard drive or Solid State drive | Fits all 3.5-Inch SATA drive bays | Fully SATA 3.0 Revision (6Gb/s) compatible and Backward compatible with SATA 2.0 Revision (3Gb/s) and 1.0 Revision (1.5Gb/s) drives | Open design allows for full air flow for proper drive cooling, Solid aluminum frame design

M.2 PCIe Gen3 x 4 Interface. Built to the PCIe 3.1 specification / NVMe 1.3 Compliant. | Power Management Support for APST / ASPM / L1.2. | Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. | Advanced Wear Leveling, Bad Block Management, and Over-Provision. | All Sabrent SSDs come with FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning. For those who require a specific sector size to clone their existing SSDs: A newly released Sabrent utility enables users to re-format the Rocket drive and choose the sector size of their liking, either 512-bytes or 4K bytes.

M.2 PCIe Gen3 x 4 Interface. Built to the PCIe 3.1 specification / NVMe 1.3 Compliant. | Power Management Support for APST / ASPM / L1.2. | Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. | Advanced Wear Leveling, Bad Block Management, and Over-Provision. | All Sabrent SSDs come with FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning. For those who require a specific sector size to clone their existing SSDs: A newly released Sabrent utility enables users to re-format the Rocket drive and choose the sector size of their liking, either 512-bytes or 4K bytes.

One 32-foot-long USB 2.0 A-Male to A-Female high-speed extension cable | Extend the cable connection between your computer (Mac/PC) and a keyboard, mouse, camera, external hard drive, printer, VoIP phone or other USB-enabled device. | Ideal for lengthening a device connection, when existing cables are too short, and giving you the convenience to move away from your desktop while using your connected devices. | Features shielding that provides protection against noise from electromagnetic and radio-frequency signals, keeping your signal clear with less loss of bandwidth for higher performance

EXPANSION: Instantly add 4 USB 2.0 Ports to Any compatible device. Transform a single USB port into a full work station. | CONVENIENCE: LED Indicators display power status for each port. Individual on/off switches enable you to easily connect and disconnect your devices with the push of a button. | SPEEDS: Supports transfer speeds of up to 480Mbps (USB 2.0), & 12Mbps (USB 1.1). Fast enough to transfer large files in seconds. | COMPATIBILITY: Reverse compatible with USB 1.1 devices. Use with PC, MacBook, iMac, Mac mini, XPS, Flash Drives, & any other USB compatible devices. | EASY SETUP: No driver installation required; Plug & Play and Hot Swappable. Does NOT support charging.

Lightweight design enables the hub to be compact and portable. CHARGING NOT SUPPORTED. | USB Connector Can be Rotated 90°/180° Degrees | Easy Setup, Plug-n-Play, Hot Swappable, Hot Pluggable | Compatible With all Windows/Mac/Linux Systems | Instantly Add Four USB 2.0 Ports to Any Compatible Device

Sleek Apple-Style Design Ideal for Mac Pro, iMac, MacBook Air, MacBook Pro, MacBook, and Mac mini | Instantly Add Four USB 3.0 Ports to Any Compatible Device | Supports Transfer Speeds up to 5Gbps (USB 3.0), 480Mbps (USB 2.0), 12Mbps (USB 1.1) | Easy Setup, Plug-n-Play, Hot Swappable, Hot Pluggable | Compatible with All Windows/Mac/Linux Systems

Instantly Add Four USB 3.0 Ports to Any Compatible Device | Individual Power Switches with LED Indicators | Supports Transfer Speeds up to 5Gbps (USB 3.0), 480Mbps (USB 2.0), 12Mbps (USB 1.1) | 2.5 Amp Power Adapter Included to Power up Your Devices | Easy Setup: Plug & Play, Hot Swappable

EXPANSION: Instantly add 4 USB 3.0 Ports to Any compatible device. Transform a single USB port into a full work station. The extended 2 ft cable allows for the perfect set up and easy access to out of the way ports. | CONVENIENCE: LED Indicators display power status for each port. Individual on/off switches enable you to easily connect and disconnect your devices with the push of a button. | SUPER SPEEDS: Supports transfer speeds up to 5Gbps (USB 3.0), 480Mbps (USB 2.0), & 12Mbps (USB 1.1). Fast enough to transfer large files in seconds. | COMPATIBILITY: Reverse compatible with USB 2.0 and USB 1.1 devices. Use with PC, MacBook, iMac, Mac mini, XPS, Flash Drives, & any other USB compatible devices. | EASY SETUP: No driver installation required; Plug & Play and Hot Swappable. Does NOT support charging.

M.2 PCIe Gen3 x 4 Interface. | Built to the PCIe 3.1 specification / NVMe 1.3 Compliant. | Power Management Support for APST / ASPM / L1.2. | Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. | All Sabrent SSDs come with FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning. For those who require a specific sector size to clone their existing SSDs: A newly released Sabrent utility enables users to re-format the Rocket drive and choose the sector size of their liking, either 512-bytes or 4K bytes.

NVMe M.2 PCIe Gen4 x4 Interface. Built to the PCIe 4.0 specification / NVMe 1.3 Compliant. | Power Management Support for APST / ASPM / L1.2. | Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. | Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision. Preinstalled Rocket NVMe Heatsink. Upgradeable Firmware. | All Sabrent SSDs come with FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning. For those who require a specific sector size to clone their existing SSDs: A newly released Sabrent utility enables users to re-format the Rocket drive and choose the sector size of their liking, either 512-bytes or 4K bytes.

M.2 PCIe Gen3 x 4 interface. Pcie 3.1 compliant/ NVMe 1.3 compliant. Power management support for apst/ aspm/ L1.2. | Supports smart and Trim commands. Supports onfi 2.3, onfi 3.0, onfi 3.2 and onfi 4.0 interface. Advanced wear leveling, bad block management, and over-provision. | Nvme enclosure - the adapter uses the latest chipset Of USB3.1 Gen2 TO PCIe lane Bridge controller. Achieving 10Gbps USB data transfer from your NVMe SSD to host PC, MacBook and NAS Disk Station. Pushing USB3.1 Gen2 TO its limit, R/W speed up to 850-1020mb/s with most NVMe. Backward compatible with USB3.1 Gen1 and USB3.0. Plug & play, No extra drive required. | Solid aluminum - 9 mm radiating advanced aluminum alloy shell that increases the thermal silicone's conductivity. Promotes greater heat dissipation that keeps the adapter efficiently working. Frosted surface provides a comfortable touch. Cnc machined aluminum material, strong and durable. Please note NVMe SSD generate a lot of heat. This is an industry standard and the aluminum enclosure is built to dissipate the heat outward. | Speed - Ultra-fast 10Gbps throughput, low latency and Power efficiency. Perfect for tech nerds, 4K content designers, and engineers. At up to 1000MB/s, data copy and transferring will be done in no time.

Smart-port technology maximizes compatibility with Android, Apple, and other devices, enabling charging power up to 12 Amps among 10 ports, or 2.4 Amps per port. | Charge your devices at full speed with 60 watts and 12A total output. Perfect for International Travel- AC 110-220V input voltage. | Charge 10 devices simultaneously. Overcharge protection Charges safely. | Charge 4 tablets and 6 smartphones, simultaneously. | Charge more than your smartphone or tablet with this multi-port adapter. Charge your e-reader, Bluetooth headphones, portable speakers and any other devices with a USB cord.

Supports 74 different types of memory cards. | Operating System Support: Windows ME/2000/XP/Vista/Window 7/8, Linu/Mac OS X. | Internal power connector to ensure USB HUB has sufficient power for external USB devices. | Plus 1 x USB 2.0 port. | The 6 card reader slots include all formats of the following flash media types: M2, XD, SD/SDHC/SDXC/MMC, Micro SD/SDHC/SDXC (T-flash) CF/MD, MS (Some card may require adapter).

Premium Aluminum Ruggedized Housing matches the Macbook/Ultrabook | High Quality Audio (In/Out) at 48KHz/44.1KHz sampling rate with 16-Bit Resolution | Plug and Play Functionality, Including 2foot Extension USB cable | 3D stereo USB audio adapter. | USB 2.0 Hi-Speed specification. Backward compatible with USB 1.1

Internal Interface: Serial ATA (SATA) Hard Drive | External Interface: USB 2.0

Note: It doesn’t support SSD M.2 PCIe NVMe or SSD M.2 PCIe AHCI [Support only M.2 SATA]. Pls check your M.2 SSD type before place order. | Compatible with M.2 SATA [NGFF] SSD and SATA-enable host devices such as Desktop & Laptop computer systems and Hot Swap 2.5'' SATA Bays. | Convert an M.2 SATA NGFF solid-state drive into a Standard 2.5'' SATA III 6Gbps SSD. Added protection for your SSD with enclosed housing. | Compatible with M.2 SATA [NGFF] SSD and SATA-enabled host devices such as Desktop & Laptop computer systems and Hot Swap 2.5 in SATA Bays. | Supports M.2 form factor: 22x30, 22x42, 22x60, 22x80. ● B & B+M Key

Sleek Apple-style design ideal For Mac Pro, iMac, MacBook Air, MacBook Pro, MacBook, and Mac mini | Instantly Add 3 USB 3.0 Ports to Your Computer With Speeds of 5Gbps (USB 3.0), 480Mbps (USB 2.0), 12Mbps (USB 1.1) | Supported Cards: CF, SD, SDXC, SDHC, MicroSD, MMC, M2 | Easy to Setup, Plug-n-Play, Hot Swappable, Hot Pluggable | Compatible With All Windows/Mac/Linux Systems

M.2 PCIe Gen3 x 4 Interface. PCIe 3.1 Compliant / NVMe 1.3 Compliant. Power Management Support for APST / ASPM / L1.2. | Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. Advanced Wear Leveling, Bad Block Management, and Over-Provision. | disk station. Pushing USB3.1 Gen2 to its limit, R/W speed up to 850-1020MB/s with most NVMe. Backward compatible with USB3.1 Gen1 and USB3.0. Plug & Play, No extra drive required. | Solid Aluminum - 9 mm Radiating Advanced Aluminum alloy shell that increases the thermal silicone's conductivity. Promotes greater heat dissipation that keeps the adapter efficiently working. Frosted surface provides a comfortable touch. CNC Machined aluminum material, strong and durable. Please Note NVMe SSD generate a lot of heat. This is an idustry standard and the aluminum enclosure is built to dissipate the heat outward. | SPEED - Ultra-fast 10Gbps throughput, low latency and power efficiency. Perfect for tech nerds, 4K content designers, and engineers. At up to 1000MB/s, Data copy and transferring will be done in no time.

SUPPORTS - Designed to work with both Windows and Mac OS, so you can transfer data between almost any computer in the world. Complies with trim, UASP, and firmware is upgradable. | PLUG & PLAY - OS independent, and fully bus powered, No drivers required. | SPEED - Ultra-fast 10Gbps throughput, low latency and power efficient. At up to 1000MB/s, | DESIGN - Ultra slim aluminum alloy sandblasted shell. Sleek, Durable, and Convenient. Portable yet durable, ideal for traveling. | USE - Perfect for a variety of uses including data transfer, high-speed storage, data backup, cloning an existing drive, running a mobile operating system, and more.

M.2 PCIe Gen3 x 4 Interface. | Built to the PCIe 3.1 specification / NVMe 1.3 Compliant. | Power Management Support for APST / ASPM / L1.2. | Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. | All Sabrent SSDs come with FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning. For those who require a specific sector size to clone their existing SSDs: A newly released Sabrent utility enables users to re-format the Rocket drive and choose the sector size of their liking, either 512-bytes or 4K bytes.

M.2 PCIe Gen3 x 4 Interface. | Built to the PCIe 3.1 specification / NVMe 1.3 Compliant. | Power Management Support for APST / ASPM / L1.2. | Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. | All Sabrent SSDs come with FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning. For those who require a specific sector size to clone their existing SSDs: A newly released Sabrent utility enables users to re-format the Rocket drive and choose the sector size of their liking, either 512-bytes or 4K bytes.

The Sabrent USB-to-Parallel, 6-foot printer cable is the best solution to convert USB signals to parallel port signals | With a bi-directional technique, this cable makes the communication completely from USB port to parallel port | The model also makes the communication work with both a PC and a Macintosh. | This USB-to-parallel printer cable is typically used to connect a printer to a USB port on a PC. | It connects a desktop or laptop computer with on-board USB to a parallel interface printer.

Supports Standard Notebook 2.5″ SATA Hard Drives. | Ultra Light Aluminum Case provides heat dissipation. | LED light indicates Power and Activity status. | Hot-swappable, plug and play, no drivers needed.

Important Information about macOS 10.13.4 update: We have become aware that installing macOS release Version 10.13.4 will cause DisplayLink connected displays to go blank after the OS upgrade. With the current DisplayLink driver [4.3] beta3 installed you will be able to extend 1 desktop. Functionality such as Ethernet and audio, where implemented, is unaffected. We have alerted Apple to this issue and are working hard to find a resolution. The macOSX version 10.13.3 is unaffected at this time | Supports Simultaneous HDMI and DVI Displays, Speaker Port, Microphone Jack | Featuring Two USB 3.0 + Two USB 2.0 Ports You Can Enjoy Transfer Speeds up to 5Gbps (USB 3.0), 480Mbps (USB 2.0), 12Mbps (USB 1.1) | 10/100/1000 Gigabit Ethernet Port For Incredible Internet Speeds | With Two 2.4A Fast Charging Ports You Can Charge Any of Your Devices