Others

Selection of replaceable atomizing heads for application of very low- to high-viscosity coatings | Allows for spraying of primer, sealer, base and clear coat from ONE gun | Fast, simple head replacement - the performance of a brand new spray gun on demand | See-through design makes it easy to see when the heads are clean | Works with 3M Accuspray ONE and PPS Systems | For industrial/occupational use only. Not for consumer sale or use. | 2.0 mm atomizing heads are typically used with our 3M Accuspra HGP Spray Gun, built specifically for applying high-volume

Durable, lightweight 1-piece composite spray gun body eliminates maintenance kits | Complete selection of replaceable atomizing heads allows for a range of applications and fluid viscosities | Air control valve helps regulate up to 12” vertical or horizontal spray patterns | Also includes mountable spray gun hanger for added convenience | Accuspray system affords the performance of a brand new gun on demand, at a fraction of the cost | For industrial/occupational use only. Not for consumer sale or use.

Adflo Filter Cover | Replacement Part | See resources section below

Sale Unit: CASE (ROLL x 72) (ROLL x 72) | Brand: 3M | 3M Number: 9498 | Adhesive Material: Acrylic | Width: 1/2 in

Excellent bond to low surface energy substrates including powder coatings and plastics such as polypropylene (PP)v | High adhesion to metals and high surface energy materials, making it suitable for bonding dissimilar substrates | Adhesive provides excellent holding power and anti-lifting properties | Good resistance to industrial chemicals, consumer chemicals, moisture and humidity | Ideal solution for general purpose attachment and assemblies of a wide variety of materials

2 mil nominal adhesive tape delivers exceptional shear strength for metals and HSE plastics | Provides very high resistance to solvents and humidity | Special PCK layflat liner for increased dimensional stability in high humidity storage, processing, shipping and application conditions | 4.2 mil PCK layflat liner virtually eliminates curling, buckling and rippling | 200MP acrylic adhesive is considered the industry standard for graphic attachment and general industrial joining applications | Temporarily repositionable adhesive improves placement accuracy, reducing rework

36 rolls

ALL-AROUND SEALANT: Medium-bodied, water-based sealer works well for both interior and exterior applications | EASY-APPLICATION: Formula adheres well to primed and painted surfaces | HIGH WORKABLITY: Sealant allows for easy feather edging | WATER CLEANUP: Water may be used for cleanup before product dries | QUICK PAINTABILITY: Allows painting in 30 minutes | For industrial/occupational use only. Not for consumer sale or use.

2" x 60 yds. 3M Aluminum Foil Tape 425 | 2" x 60 yds. 3M Aluminum Foil Tape 425 | 2" x 60 yds. 3M Aluminum Foil Tape 425 | 2" x 60 yds. 3M Aluminum Foil Tape 425 | 2" x 60 yds. 3M Aluminum Foil Tape 425

3/4" x 60 yds. 3M Aluminum Foil Tape 425 | 3/4" x 60 yds. 3M Aluminum Foil Tape 425 | 3/4" x 60 yds. 3M Aluminum Foil Tape 425 | 3/4" x 60 yds. 3M Aluminum Foil Tape 425 | 3/4" x 60 yds. 3M Aluminum Foil Tape 425

3M 425 Aluminum Foil Tape is a dead-soft aluminum foil-backed tape with a special transparent synthetic acrylic adhesive, making this the best general-purpose foil product available. This tape is ideal for masking, sealing, seaming, shielding, chemical stripping, harness wrapping, joining, electroplating, plastic protection, chemical milling, heat shielding, heat reflecting and paint stripping. | 3M Aluminum Foil Tape 425 has excellent heat and light reflection to protect against high temperature and ultraviolet (UV) degradation. It's also an effective barrier against moisture, dust, flame, dirt and mild chemicals used in paint stripping and masking. | The thermally conductive backing of 3M 425 helps maximize efficiency by dissipating heat over a wider surface area. The synthetic acrylic adhesive provides superior temperature, U.V., and solvent resistance to produce a strong, lasting and reliable bond. It provides excellent age life and is ideal for harsh, long-term indoor and outdoor environments. | Uses and applications include aircraft paint stripping masking (approved by the Department of the Navy Technical Order TO 1-1-8), moisture barrier in "white goods" appliances, general-purpose heat reflector and heat dissipator, mechanically holds wires and cooling coils in "white goods" appliances, and more. Carrier/Backing: aluminum foil. Adhesive: synthetic acrylic. Thickness: 4.6 mils (carrier, adhesive) 2.8 mils (carrier). | Adhesion: 47 ounces per inch (to stainless steel test panel). Tensile Strength: 30 pounds per inch (longitudinal). Service/Operating Temperature: -65F to 300F. Elongation: 8%. Standards Met: meets U.L. 746C (File E 122798) and 723, Class "L" for low flammability rating (File R 7311); can be certified to meet SAE-AMS-T-23397 and L-T-80C; meets F.A.R 25.853(a), O447.

Sale Unit: ROLL | Brand: 3M | 3M Number: 425 | Application: EMI Shielding; Heat Shield; Refrigeration | Foil Thickness: 2.8 mil

Conformable, closed cell 1.52 mm acrylic foam core provides excellent wet out on surface contours | Good choice for demanding trim attachment or where a thick foam is required | Features two adhesives - one on each side of the tape for effective bonding | Liner side adhesive is designed for adherence to automotive paint systems | Non-liner side adhesive delivers excellent adhesion to metal and plastic parts

Helps ensure robust attachment of trim and injection-molded body side moldings | Notched packets open quickly and evenly for efficient use | Dries in as little as 30 seconds | One packet covers up to 150 sq. in. | For use on LSE plastics with 3M Acrylic Foam Tapes

Replacement parts are easy to find and order online 24/7 at 3Mcom | Keep your power tool productive and performing at its peak | Detailed schematics included in your owner's manual make it easy to identify the part you need | High quality replacement parts designed by 3M for your 3M Right Angle Grinder and Sander fit with precision

Sale Unit: CASE (PIECE x 3000) (PIECE x 3000) | Brand: 3M | Trade Name: Bumpon | 3M Number: SJ5382 | Color: Clear

Sale Unit: PIECE | Brand: 3M | Trade Name: Bumpon | 3M Number: SJ5303 | Color: Clear

Sale Unit: CASE (EACH x 3000) (EACH x 3000) | Brand: 3M | Trade Name: Bumpon | 3M Number: SJ5302 | Color: Clear

3M

Sale Unit: PAD (PIECE x 56) | Brand: 3M | Trade Name: Bumpon | 3M Number: SJ6512 | Color: Clear