GARDNER BENDER

Package Weight: 3.425 kilograms | The Package Height of the Product is 31.2 centimetres | The Package Length of the Product is 6.6 centimetres | The Package Width of the Product is 22.9 centimetres

This compact multimeter can fit into a shirt pocket and includes a booklet type carrying case and one set of test leads | Has over load protection on all ranges | Tests AC/DC Voltage, resistance, continuity & diode | Auto off function included to save you battery life

175 lb. tensile strength | Releasable/reusable | Black nylon | UL listed | Polybag/25

Locknut wrench solves the problem of tight spaces and fits the majority of UL locknuts | Etched markings allow for easy identification; clearly marked tighten and loosen ends make usage a breeze; each tool is a different color for easy size identification | Thin design allows easy maneuvering in tight locations | Hooked tip latches onto locknut and maximizes turning leverage | 3-piece kit includes the 1/2 in. , 3/4 in. and 1 in. sizes

Four-point design allows slug to drop automatically without splitting For 10-gauge mild steel and 12-gauge stainless steel

Patented, snap-in leads are spaced to fit a standard outlet for easy one-hand testing | Compact ergonomic design with soft grips for comfort | Hi-Visibility voltage indication | Tests for voltage within 4 ranges from 80-480V AC/DC - UL Listed | Durable heavy-duty design with over-molded rubber grips and a pocket clip

Combined multi-scanner and electrical tester simplifies installation of electrical boxes, switches and outlets | 3-SELECTABLE MODES: stud scan, metal scan, or AC voltage detection. Detects metal pipes or objects to a maximum depth of 2½ - ½ in. drywall | Non-contact AC voltage detection (50-600VAC) to maximum depth of 3.5 -.5 inch drywall. Scans and locates wood or metal studs at a depth up to .75 inch. | Durable heavy-duty design with over-molded rubber grips | Integrated 3-wire circuit analyzer with GFCI test functionality. Built-in metal tip for marking stud edge, pipe location or desired mounting point

Accessory kit: for tracing light Fixtures, switches, and other energized wiring | Insulated leads and probes for safe operation | Audible and visual LED alert: designed for operation at 120V AC and 60Hz

ARMOR EDGE CABLE STRIPPER 12/2 & 14/2 NM CABLE

Stainless steel blade resists corrosion | Dual GRIP is easier on wrists | Double bevel cutting blades for superior nick resistance | Over molded ergonomic handles for comfort | Laser etched permanent markings

Stainless steel blade resists corrosion | Dual GRIP is easier on wrists | Double bevel cutting blades for superior nick resistance | Over molded ergonomic handles for comfort | Laser etched permanent markings

Stainless steel blade resists corrosion | Dual GRIP is easier on wrists | Double bevel cutting blades for superior nick resistance | Over molded ergonomic handles for comfort | Laser etched permanent markings

Stainless steel blade resists corrosion | Dual GRIP is easier on wrists | Double bevel cutting blades for superior nick resistance | Over molded ergonomic handles for comfort | Laser etched permanent markings

QUICKLY AND EASILY: identifies correct circuit breaker or fuse protecting a specific electrical circuit | SAFE FOR USE NEAR: Sensitive electronic equipment and no need to interrupt power when using | INCLUDES: A plug style transmitter and an auto sensing receiver | AUDIBLE ALERT AND BRIGHT LED: Visual indication on both transmitter and receiver | DESIGNED FOR: Operation at 120V AC, 50-60Hz - UL Listed

Double easy-to-read color-coded scales indelicate power level

Embossed sight lines for 10°, 22°, 30°, 45°, 60° and 90° | Industry-standard markings- 30° bend when handle is straight up | Bigger hook with a 5x durability factor | Bigger foot pedal- 40% larger | More foot room allows for a booted foot

Bigger foot panel | Conduit bend back channel for correcting over-bends | Conduit vise for cutting or reaming | Benfield style angle markings | 1/2 in. EMT Bending capacity. Cast aluminum material.

Embossed sight lines for 10°, 22°, 30°, 45°, 60° and 90° | Industry-standard markings- 30° bend when handle is straight up | Bigger hook with a 5x durability factor | Bigger foot pedal- 40% larger | More foot room allows for a booted foot

Embossed sight lines for 10°, 22°, 30°, 45°, 60° and 90° | Industry-standard markings- 30° bend when handle is straight up | Bigger hook with a 5x durability factor | Bigger foot pedal- 40% larger | More foot room allows for a booted foot

Embossed sight lines for 10°, 22°, 30°, 45°, 60° and 90° | Industry-standard markings- 30° bend when handle is straight up | Bigger hook with a 5x durability factor | Bigger foot pedal- 40% larger | More foot room allows for a booted foot

Embossed sight lines for 10°, 22°, 30°, 45°, 60° and 90° | Industry-standard markings- 30° bend when handle is straight up | Bigger hook with a 5x durability factor | Bigger foot pedal- 40% larger | More foot room allows for a booted foot

Patented design with LOCKING TEETH on both sides of the tie ENSURE A STRONGER CONNECTION at the head with 50% greater tensile strength than the industry standard | 3 inch Maximum BUNDLE DIAMETER | 11 inch Long X 0.17 inch Wide X .055 inch Thick with 75 Lb. Tensile Strength | RAISED RIDGES on the cable ties bent tips PROVIDE A SECURE GRIP | Made from DURABLE 100% NYLON 6/6 material | DoubleLockTM Design | Meets military spec MS3367 | UL listed | -40 to 185 deg F | 75lbs Tensile Strength

Made from durable nylon 6/6 material | Ultraviolet black (UVB) ties resist harmful light rays | Miniature and Standard Cable Ties

Made from durable nylon 6/6 material | Ultraviolet black (UVB) ties resist harmful light rays | Miniature and Standard Cable Ties

SAVE TIME AND MONEY: Quick application bundling device - no need to grab extra tools. No need to buy extra items to trim tie | EASY: Just simply twist the tie and tear off the extra amount when complete | SMALL CUTTING BLADE inside each tie is made of stainless steel to prevent corrosion and rust | 3/8 inch MINIMUM and 2 inch MAXIMUM BUNDLE DIAMETER | Small cutting blade inside the head of each tie is made of stainless steel

Patented design with LOCKING TEETH on both sides of the tie ENSURE A STRONGER CONNECTION at the head with 50% greater tensile strength than the industry standard | Bent tip ensures EASY INSERTION into the tie head | EASY 'slip' during pull-thru due to smooth radiuses edges | Finger grips on end provides SECURE GRIP TO TIGHTEN | Made from DURABLE 100% NYLON 6/6 material | DoubleLock Design | Meets military spec MS3367 | UL listed | -40 to 185 deg F | 75lbs Tensile Strength

DESIGNED FOR RUGGED ENVIRONMENTS demanding HEAVY BUNDELING and LARGE BUNDLE DIAMETERS | Lock tight without stretching or sliding | Bent tip ensures EASY INSERTION into the tie head | RAISED RIDGES on the cable ties bent tips PROVIDE A SECURE GRIP | Made from DURABLE 100% NYLON 6/6 material