Electrical Tools

Works with aircraft, EHS, messenger and guy strand cable | Designed for cable sizes from 0.12 to 0.37-Inch (3.05 to 9.40 mm) and has max safe load of 4500-Pound (2041 kg) | Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable | Sawtooth profile provides extra gripping power | Made in USA | For larger conductors, see our grips with round inside-jaw contour

Lightweight, cost-effective grip for solid and stranded #8 AWG to #6 AWG bare copper wire | Works within 0.08 to 0.20-Inch (2.0 to 5.1 mm) cable diameter range | Single ''V'' groove jaw with 3-Inch jaw length | Max Safe Load of 1500-Pound (680 kg) | Made in USA

Used for Aircraft, EHS, Messenger, Guy Strand cables | Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of 15,000-Pound (6803 kg) | Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable | For larger conductors, see our grips with round inside-jaw contour | Made in USA | Locking handle keeps jaw open while grip is placed on cable with a hot stick

Designed for cable sizes from 0.218 to 0.55-Inch (5.5 to 13.9 mm) with Max Safe Load of 8000-Pound (3629 kg) | Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable | Manufactured from drop-forged, heat-treated steel for excellent durability | Locking handle keeps jaw open while grip is placed on cable with a hot stick | Made in USA

Tests circuits rated from 80 to 600 volts AC/DC | High-visibility neon lamp indicator | High-impact, sealed 5-11/16-Inch (144 mm) probes on long 24-Inch (610 mm) leads for convenience in testing motors, fuses, relays, switches, etc | Resistor between each probe and lead | Reliable electronic components

ACCURATE CIRCUIT BREAKER IDENTIFICATION: Quickly locate the correct breaker with precision using our circuit breaker finder, ensuring efficient electrical troubleshooting | TWO-PART SYSTEM: Consists of a Transmitter connected to the outlet/fixture and a Receiver to scan the panel, allowing for easy and accurate breaker identification | CLEAR INDICATIONS: The Receiver provides visual and audible cues when the correct breaker is found, ensuring a hassle-free locating process | WIDE COMPATIBILITY: Operates on 90-120V AC circuits, making it suitable for a variety of electrical systems and installations | BUILT-IN GFCI TESTER: The Transmitter includes a GFCI outlet tester, enabling you to inspect wiring conditions and test GFCI devices for added safety | CONVENIENT STORAGE: The Transmitter docks in the Receiver, offering a compact storage solution, keeping the components together when not in use | UNIVERSAL CONNECTIVITY: The Transmitter features a three-pin plug for easy connection to North-American-style grounded electrical outlets, ensuring seamless compatibility

Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy | Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes | Thermocouple probe measures temperature | Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages | CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating | Built to withstand a 6.6-Foot (2m) drop | Low battery indicator and easily accessible battery compartment

For use with 1/8-Inch wide steel fish tapes | Flexible leader guides steel tapes through 90-degree bends and makes pulling and pushing flat steel tapes easier | The 3/16-Inch diameter tape has a rustproof inner steel cable core wrapped with a spiral cover for exceptional flexibility | High capacity eyelet holds up to five #12 unstripped wires and seven #10 bare wires; heavy duty construction is strength rated up to 250 pulling pounds | Made in USA

Designed for use when light, compact grip is desired and where conductor damage is not a factor | Works with Messenger and Guy Strand cable diameter range of 0.06-Inch to 0.25-Inch (1.52 mm - 6.35 mm) | Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area | Maximum safe load of 2,500 lbs (1,134 kg) | Made in USA | Approximate weight of each is 1-pound

Designed for use when light, compact grip is desired and where conductor damage is not a factor | Works on 0.38 to 0.88-Inch (9.65 to 22.35 mm) wire rope cable diameter range with max safe load of 8000 lb (3629 kg) | Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area | Swing latch helps hold cable in the jaw | Made in USA

Designed for use when a light, compact grip is desired and where conductor damage is not a factor | Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm) | Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area | Swing latch helps hold cable in the jaw; maximum safe load is 5000-Pound (2268 kg) | Made in USA

MULTI-GROOVES: Molded into fish tape for less friction and smoother tape feeding in conduit with or without wires | NON-CONDUCTIVE: Fish tape and nylon eyelet tip provides added protection against shock from energized sources | SLIP-RESISTANT GEOMETRY: Improves winding power and reduces binding | HANDLE PERFORMANCE: Multi-position handle provides a firm and steady grip when pulling or rewinding tape | ERGONOMIC HANDLE: Multi-position handle provides a firm and steady grip when tape is pulled from the case

Multiple grooves molded into the fish tape provides less friction in conduit with or without wires for smoother tape feeding | Durable 7-Inch spiral steel leader helps push through crowded conduit | The 17-Inch case diameter means you can reel in 10-percent more tape in a single revolution vs. a 16-Inch case | Raised fingergrips help transfer 100-percent of the winding power from your hand and fingers | Made in USA | The unique sloped handle optimizes the position of your hand for quick hand-over-hand rewinds and allows a more level payout of tape on the backswing while feeding conduit

Non-contact Tester determines AC voltage in cables, cords, circuit breakers, switches, outlets, wires, as well as security, entertainment, communications, environmental control, and irrigation systems | Volt Pen detects AC voltage from 12 to 1000V with visual and audible indicators | Incorporates a 66-Foot (20 m) Laser Distance Meter that can measure in meters, inches in fractions or decimals, and feet in fractions or decimals, with accuracy up to 1/16-Inch (0.16 cm) | High-visibility reverse contrast display for better viewing in low light conditions | Laser Class II, 630 to 670nm, Max. Power <1mW

Voltage Tester designed specifically for HVAC applications | Non-Contact Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, and AC voltage in security, entertainment, communications, environmental control, and irrigation systems | Detects AC voltage from 12 to 1000V with visual and audible indicators | 4:1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celsius from -22 to 482-Degree Fahrenheit (-30 to 250-Degree Celsius) | Convenient laser pointer to target measurement area for temperature measurement

Versatile grip hold a wider range of ACSR cable sizes reducing the number of grips needed | Round serrated jaw holds 0.18 to 0.60-Inch (4.57 to 15.20 mm) diameter cable range | Spring closes grip on cable to hold the initial position | Spring‐loaded for easy one‐handed operation | Made in USA

WATER LEAK DETECTOR detects moisture content from leaks and flooding | PINLESS MOISTURE METER measures moisture content in building materials | NONDESRUCTIVE DETECTION up to 3/4-Inch deep using Electromagnetic field (EMF) technology | USE ON DRYWALL, MASONRY, HARDWOOD, AND SOFTWOOD; calibrated for these materials only | REVERSE-CONTRAST DISPLAY for easy viewing of reading and nine LED bars to indicate moisture range | FULL FEATURE TOOL includes hold, low battery, and auto-power off functions | COMPLETE MOISTURE METER KIT includes meter with 2m drop protection, 9V battery, and instruction manual

Outlet tester's light sequence on receptacle tester indicates correct/incorrect wiring | Receptacle tester conforms to UL Std 1436, Certified to CSA Std C22.2 #160 | Operating temp: 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C) | Built to withstand a 6.6-foot (2m) drop | Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet | Designed to detect the most common wiring problems in standard receptacles

STEEL DESIGN: Durable, high-carbon strength 1/8-Inch wide steel fish tape is firm yet flexible for large wire pulls | OPTIMIZED HOUSING DESIGN: Decreases payout effort and friction by optimizing the tape payout angle | SLIP-RESISTANT GEOMETRY: Improves winding power and reduces binding | ERGONOMIC HANDLE: Multi-position handle provides a firm and steady grip when tape is pulled from the case | EASY-TO-READ LASER MARKINGS: Descending laser etched markings in 1-Foot increments and amount of tape left to pay out

3 to 20V DC; Current: 0.05 to 3A (monitoring mode) | Built-in test loads of 0.5A, 1A, 2A, and 3A; no external test load required | Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated) | Tests most common standard USB-A ports, including Qualcomm Quick Charge ports | Store and recall up to 10 readings | Voltage and current overload detection | Hi-resolution LCD for clear visibility in environments with low ambient lighting

Tether-Ready 3/16" Pin Punch | Tether-Ready 3/16" Pin Punch | Tether-Ready 3/16" Pin Punch | Tether-Ready 3/16" Pin Punch | Tether-Ready 3/16" Pin Punch | 3/16-inch Tip Width | 3/8-inch Shank Width | 5-7/8-inch Length | Made from S2 Steel and Specially Heat-Treated for Greater Strength and Durability | Modified Parabolic Striking End to Help Reduce Mushrooming and Chipping

Test lead input icons for correct lead placement | Industry leading LCD display size | Large digits for easy viewing | AC/DC voltage and current capable | Data hold feature captures reading on the display

Measures AC/DC Voltage, Resistance, Frequency, Continuity, Duty Cycle, and Diode Test | Pocket-sized design for easy use, storage and transportation | Data hold feature captures the reading on the display | Auto power off and low battery indicator