With 30 degree helix | High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance | Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications | Round shanks allow use with a wide variety of toolholding systems | When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging | Made in the USA
NAS 907 Rev. 14 type A standards, for use in the aerospace industry | 6” extended shank length, for extra reach | 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges | High-speed steel (HSS), for use on a wide variety of materials | Uncoated (bright), for use with a wide range of drilling materials | Made in the USA
135-degree split-point angles for centering and to reduce pressure on cutting edges | High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances | Black oxide finish, for improving lubricity, resisting corrosion, and resistances to chipping or flaking | Jobber-length, for a wide range of applications | NAS 907 type D standards, for use in the aerospace industry | Made in the USA
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance | Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications | Round shanks allow use with a wide variety of toolholding systems | Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts | Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction | Made in the USA
12” extended shank length, for extra reach | 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges | High-speed steel (HSS), for use on a wide variety of materials | Uncoated (bright), for use with a wide range of drilling materials | NAS 907 Rev. 14 type A standards, for use in the aerospace industry | Made in the USA
Price For: Pack of 12 Drill Bit Material: Cobalt Steel Point Type: Split Drill Bit Point Angle: 135 Degrees Shank Type: Straight Flute Type: Spiral Shank Dia.: 0.1935" Application: For Drilling Cast Iron, Carbon Steel, Alloy Steel, Die Steel, Stainless Steels, Hardened Steel Under 50 HrC and Titanium Alloys Shank Type - Machining: Straight Coolant Through: No Standards: Not Rated | Depth x Dia. Ratio: 10xD Number of Flutes: 2 Item: Extra Long Drill Bit Flute Length: 2-7/16" Drill Bit Dimension Type: Wire Grade: Heavy Duty Drill Bit Finish: Straw/Bronze Decimal Equivalent: 0.1935 List Number: 3722-6 Overall Length: 6" Cutting Direction: Right Hand Drill Bit Size: #10 Depth:Dia. Ratio: 10xD Material: HSS-CO 8% (M42) Point Angle: 135 Shank Size: 0.1935 | Drill Style: Aircraft Extension Drill Shank Length: 3-9/16" Left/Right Hand: Right Diameter: 0.1935 Measurement System: Wire Coolant Fed: Non-Coolant Through Series: 3722-6 Maximum Drilling Depth: 2-7/16" Finish - Machining: Straw/Bronze Aircraft Drill: Yes Primary Material Application ISO Code: M, N, P Drill Point Length: 0.0401" | Secondary Material Application: Cast Iron, Nickel, Stainless Steel, Titanium Material Grade - Machining: M42 Primary Material Application: Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel Secondary Material Application ISO Code: K, M, S Drill Bit Point Type: Split Point Drill Length Class: Extra Long Helix Angle: 28 Degrees Drill Diameter Tolerance: +0.0000"/-0.0007" Spiral Direction: Right Hand | Material - Machining: Cobalt Country of Origin (subject to change): United States
NAS 907 Rev. 14 type A standards, for use in the aerospace industry | 6” extended shank length, for extra reach | 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges | High-speed steel (HSS), for use on a wide variety of materials | Uncoated (bright), for use with a wide range of drilling materials | Made in the USA
135-degree split-point angles for centering and to reduce pressure on cutting edges | High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances | Black oxide finish, for improving lubricity, resisting corrosion, and resistances to chipping or flaking | Jobber-length, for a wide range of applications | NAS 907 type D standards, for use in the aerospace industry | Made in the USA
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance | Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications | Round shanks allow use with a wide variety of toolholding systems | Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts | Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction | Made in the USA
12” extended shank length, for extra reach | 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges | High-speed steel (HSS), for use on a wide variety of materials | Uncoated (bright), for use with a wide range of drilling materials | NAS 907 Rev. 14 type A standards, for use in the aerospace industry | Made in the USA
Price For: Pack of 12 Application: For Drilling Cast Iron, Carbon Steel, Alloy Steel, Die Steel, Stainless Steels, Hardened Steel Under 50 HrC and Titanium Alloys Item: Extra Long Drill Bit Depth:Dia. Ratio: 10xD Number of Flutes: 2 Point Type: Split Drill Bit Finish: Straw/Bronze Shank Dia.: 0.1910" List Number: 3722-6 Drill Bit Dimension Type: Wire Flute Length: 2-5/16" Flute Type: Spiral | Coolant Through: No Shank Type: Straight Standards: Not Rated Drill Bit Size: #11 Cutting Direction: Right Hand Shank Type - Machining: Straight Grade: Heavy Duty Drill Bit Point Angle: 135 Degrees Drill Bit Material: Cobalt Steel Depth x Dia. Ratio: 10xD Decimal Equivalent: 0.1910 Overall Length: 6" Point Angle: 135 Material: HSS-CO 8% (M42) Diameter: 0.191 Measurement System: Wire | Drill Style: Aircraft Extension Drill Shank Length: 3-11/16" Shank Size: 0.191 Left/Right Hand: Right Coolant Fed: Non-Coolant Through Series: 3722-6 Finish - Machining: Straw/Bronze Maximum Drilling Depth: 2-5/16" Drill Diameter Tolerance: +0.0000"/-0.0007" Drill Point Length: 0.0396" Primary Material Application ISO Code: M, N, P Material - Machining: Cobalt Helix Angle: 28 Degrees | Spiral Direction: Right Hand Secondary Material Application: Cast Iron, Nickel, Stainless Steel, Titanium Drill Bit Point Type: Split Point Drill Length Class: Extra Long Primary Material Application: Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel Material Grade - Machining: M42 Aircraft Drill: Yes Secondary Material Application ISO Code: K, M, S Country of Origin (subject to change): United States
NAS 907 Rev. 14 type A standards, for use in the aerospace industry | 6” extended shank length, for extra reach | 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges | High-speed steel (HSS), for use on a wide variety of materials | Uncoated (bright), for use with a wide range of drilling materials | Made in the USA
135-degree split-point angles for centering and to reduce pressure on cutting edges | High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances | Black oxide finish, for improving lubricity, resisting corrosion, and resistances to chipping or flaking | Jobber-length, for a wide range of applications | NAS 907 type D standards, for use in the aerospace industry | Made in the USA
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance | Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications | Round shanks allow use with a wide variety of toolholding systems | Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts | Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction | Made in the USA
12” extended shank length, for extra reach | 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges | High-speed steel (HSS), for use on a wide variety of materials | Uncoated (bright), for use with a wide range of drilling materials | NAS 907 Rev. 14 type A standards, for use in the aerospace industry | Made in the USA
NAS 907 Rev. 14 type A standards, for use in the aerospace industry | 6” extended shank length, for extra reach | 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges | High-speed steel (HSS), for use on a wide variety of materials | Uncoated (bright), for use with a wide range of drilling materials | Made in the USA
135-degree split-point angles for centering and to reduce pressure on cutting edges | High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances | Black oxide finish, for improving lubricity, resisting corrosion, and resistances to chipping or flaking | Jobber-length, for a wide range of applications | NAS 907 type D standards, for use in the aerospace industry | Made in the USA
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance | Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications | Round shanks allow use with a wide variety of toolholding systems | Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts | Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction | Made in the USA
12” extended shank length, for extra reach | 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges | High-speed steel (HSS), for use on a wide variety of materials | Uncoated (bright), for use with a wide range of drilling materials | NAS 907 Rev. 14 type A standards, for use in the aerospace industry | Made in the USA
Price For: Pack of 12 Shank Type - Machining: Straight Drill Bit Dimension Type: Wire List Number: 3722-6 Flute Length: 2-5/16" Application: For Drilling Cast Iron, Carbon Steel, Alloy Steel, Die Steel, Stainless Steels, Hardened Steel Under 50 HrC and Titanium Alloys Item: Extra Long Drill Bit Depth x Dia. Ratio: 10xD Grade: Heavy Duty Shank Type: Straight Drill Bit Size: #13 | Cutting Direction: Right Hand Point Type: Split Overall Length: 6" Decimal Equivalent: 0.1850 Coolant Through: No Shank Dia.: 0.1850" Drill Bit Point Angle: 135 Degrees Depth:Dia. Ratio: 10xD Drill Bit Material: Cobalt Steel Number of Flutes: 2 Standards: Not Rated Flute Type: Spiral Drill Bit Finish: Straw/Bronze Material: HSS-CO 8% (M42) Point Angle: 135 Left/Right Hand: Right | Diameter: 0.185 Shank Size: 0.185 Shank Length: 3-11/16" Drill Style: Aircraft Extension Drill Measurement System: Wire Coolant Fed: Non-Coolant Through Series: 3722-6 Secondary Material Application: Cast Iron, Nickel, Stainless Steel, Titanium Drill Point Length: 0.0383" Material Grade - Machining: M42 Primary Material Application: Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel | Drill Length Class: Extra Long Drill Diameter Tolerance: +0.0000"/-0.0007" Secondary Material Application ISO Code: K, M, S Finish - Machining: Straw/Bronze Spiral Direction: Right Hand Drill Bit Point Type: Split Point Maximum Drilling Depth: 2-5/16" Helix Angle: 28 Degrees Material - Machining: Cobalt Primary Material Application ISO Code: M, N, P Aircraft Drill: Yes | Country of Origin (subject to change): United States
NAS 907 Rev. 14 type A standards, for use in the aerospace industry | 6” extended shank length, for extra reach | 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges | High-speed steel (HSS), for use on a wide variety of materials | Uncoated (bright), for use with a wide range of drilling materials | Made in the USA
135-degree split-point angles for centering and to reduce pressure on cutting edges | High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances | Black oxide finish, for improving lubricity, resisting corrosion, and resistances to chipping or flaking | Jobber-length, for a wide range of applications | NAS 907 type D standards, for use in the aerospace industry | Made in the USA
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance | Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications | Round shanks allow use with a wide variety of toolholding systems | Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts | Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction | Made in the USA
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance | Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications | Round shanks allow use with a wide variety of toolholding systems | When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging | Ideal for long reach applications | Made in the USA
135-degree split-point angles for centering and to reduce pressure on cutting edges | High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances | Black oxide finish, for improving lubricity, resisting corrosion, and resistances to chipping or flaking | Jobber-length, for a wide range of applications | NAS 907 type D standards, for use in the aerospace industry | Made in the USA