Includes push here diagnostic (phd) button which check connected speaker lines for wiring and impedance errors | 100W into 25V/70.7V and 4 ohm loads | Ideal for paging | included_components : Audio - Commercial
Includes stainless steel plate | 100 watt, 3 dB attenuation per step, 27 dB total attenuation plus positive off (no stop between maximum and off position to prevent switch damage) | 0.6 dB insertion loss, designed for 25 and 70V systems | One gang plate sizes
True vca for remote volume control of mic or line sources. | Two 2 mic line inputs. | All windows via Phoenix style connectors. | High quality microphone preamp with switchable 24V phantom power. | 12Dboctave low cut filter 125Hz.
Impact and environment-resistant construction for dependable indoor/outdoor Use | Specifically designed for surface or Concealed mounting | U.S.-Made Compression driver assures high reliability
Two 2 balanced mic line inputs | High Gain 50dB microphone preamps | Switchable 24V phantom power | One 1 unbalanced summing dual RCA line input | Vox sense and contact closure priority mute of Ch 3 | included_components: Audio - Commercial
10 attenuation steps PLUS positive off | Mount into most 1-gang E.O. Boxes | Wall plates are stainless steel with stamped and filled dial scale, and a skirted Black knob | Power rating: 35W - total attenuation: 27dB
Includes Two 2 In. X 4 In. Internal Speakers | Self Contained Audio Masking System (1 Channel, 1 Zone) For Small Projects | Up To 20 Remote Speakers Can Be Powered (M1000, M2000Lp Or M2000Sm | Compact Enclosure | 12W X 2 Channel Class D Amplifier
Pre-punched to accommodate up to 6 Atlas Sound attenuators | 2 RU, 14 gauge, black filler plugs provided if not fully loaded | Made in USA | included_components : Racks
Balanced high Gain outputs; 24 dB converters; Ethernet Network connectivity; high quality mic preamp (that); mic or line selectable inputs; Ultra low noise floor; 48 kHz; external power supply (included); drag and drop open architecture | 4"W x 1.5"H x 5.2"D. | 4 inputs and 4 outputs | 40 bit floating DSP engine | Output peak and signal Indicator LEDs
Short, discrete microphone stand with 2 heights | Perfect for positioning microphones on snare drums, kick drums, and guitar/bass cabinets | Same heavy-duty clutch and base design used in the proven MS-12 series with 2 height options | Perfect for use with the ebony version of the PB11X short telescopic boom stand | Perfect for positioning microphones on snare drums, kick drums, and guitar/bass cabinets
Pre-Assembled Unit Includes 8" dia. Loudspeaker, Transformer, Enclosure, Baffle and Mounting Hardware | Labor-Saving Hardware Package - Complete with New Snap Hanger Assembly, Allows Quick and Easy Installation | Suitable for Use Above Suspended Ceiling Systems or Open Ceiling Spaces Approved for Use in Air Handling (Plenum Ceilings) | Innovative Input Panel Includes Combination Knock-Out and Strain Relief Connector to Accommodate Flexible or Rigid Conduit | Safety Listed to UL 1480 and UL 2043
Atlas Sound MS20 heavy-duty microphone stands provide extra stability via a larger 14 lb | , 12" base | The oversized 2-piece tube design extends from 37" to 60" via a 1-1/8" adjustable clutch | Atlas Sound MS20 heavy-duty microphone stands provide extra stability via a larger 14 lb
Great for use with MS or DMS series stands | The Atlas PB21X Extendable Length Boom adjusts from 25-1/2" to 38-1/2" and features a 2-lb | adjustable counterweight | Perfect for live sound or recording | The Atlas PB21X Extendable Length Boom adjusts from 25-1/2" to 38-1/2" and features a 2-lb
Includes programming software | Four white pink noise generators | Two mic-line inputs with four channel DSP processor | Generator spectral purity | connectivity technology: Phoenix
Four balanced mic and line inputs | Four Professional Grade mic preamps with switchable 24V phantom power | Up to 50 dB mic Gain per input | 12 dB and octave low cut filter at 125 Hz | Balanced line output